Hitachi U-5100 Instruction Manual page 226

4.1 Loading or Deleting the Saved Data
when the data of sample measurement is included.
If wavelength scan or time scan data is opened, the
calibration curve data cannot be found.
Therefore, you must return to Step 2 "Calibration Curve
Data Loading Procedure" and select the data again.
[When the open data is standard data alone]
Photometry
ID ABS
STD1 0.001
STD2 0.102
STD3 0.205
Select function. :_
1)Sample Meas. 2)Curve 3)Save
Example of screen showing measured data of
3 standard samples
Fig. 4-14 Standard Data-only Screen
Sample measurement is allowed by selecting the <1>
key (for Sample).
[When the open data includes sample data]
Photometry
ID ABS
11 0.001
12 0.102
13 0.205
14 0.172
15 0.051
Select function. :_
1)Meas. 2)Curve 3)Save 4)Print
Example of screen showing measured data of
15 unknown samples
Fig. 4-15 Sample Data-included Screen
When you select the <1> key (for Meas.) and then the
<1> key (for New Meas.), the data area of the open file
is cleared and sample measurement is allowed with
the same calibration curve as that of this file.
4 - 12
CELL 1
CONC
0.000
10.00
20.00
CELL 1
CONC
0.000
10.10
20.05
17.04
5.10