Hitachi U-5100 Instruction Manual page 99

Table 3-14 How to Set Cells with ON Selected for SAMP. Autozero
Cell A*
1st round STD1 or blank
2nd round STD1 or blank
3rd round STD1 or blank
4th round and Repeated until the specified number of samples are all measured.
subsequent
* Set the solution selected in "Curve Autozero". When Factor is selected for Curve Type, set STD1
or blank.
Table 3-15 How to Set Cells with Sample Blank Selected for SAMP. Autozero
1st round Sample blank
2nd round Sample blank
3rd round Sample blank
4th round and Repeated until the specified number of samples are all measured.
subsequent
Table 3-16 How to Set Cells with OFF Selected for SAMP. Autozero
Cell A*
1st round Not set
2nd round Not set
3rd round Not set
4th round and Repeated until the specified number of samples are all measured.
subsequent
* Upon completion of each round, you can execute auto zero with cell A if needed. For details,
refer to Fig. 3-18.
Cell 1
Sample 1
Sample 6
Sample 11
Cell A Cell 1
Sample 1
Sample 6
Sample 11
Cell 1
STD1
STD6
STD11
Cell 2 Cell 3
Sample 2 Sample 3
Sample 7 Sample 8
Sample 12 Sample 13
Cell 2 Cell 3
Sample 2 Sample 3
Sample 7 Sample 8
Sample 12 Sample 13
Cell 2 Cell 3
STD2 STD3
STD7 STD8
STD12 STD13
3 - 35
3.2.1
Cell 4 Cell 5
Sample 4 Sample 5
Sample 9 Sample 10
Sample 14 Sample 15
Cell 4 Cell 5
Sample 4 Sample 5
Sample 9 Sample 10
Sample 14 Sample 15
Cell 4 Cell 5
STD4 STD5
STD9 STD10
STD14 STD15