4.6 Introduction and Mounting Method of Separately Available Options
(2) Only one screw is used for fastening both the sample
compartment and rectangular long-path cell holder.
Tighten the screw firmly using a Phillips screwdriver.
Fig. 4-75
(3) Holder mounting is now completed. Close the lid of
the sample compartment.
Fig. 4-76
3.
Change of 6-cell Mode Setting
The 6-cell mode setting needs to be changed.
Turn the 6-cell mode setting from ON to OFF, referring to
section 2.5.4.
Carry out measurement, after referring to section 4.6.5.
4 - 58
Mounting Rectangular Long-Path
Cell Holder in Sample Compartment
View After Mounting the Rectangular
Long-Path Cell Holder
Screw