Table of Contents
Advertisement
3.2 Automatic Continuous Measurement (6-cell auto mode)
(2) Before proceeding to the next measurement, the
system displays the data deletion confirming screen
(Fig. 3-60). When data has already been saved or
printed, select the <1> key (Yes). If data has not yet
been saved or printed, select the <2> key (No) and
perform the save or print operation.
Data will be deleted. Continue? :＿
□ 1 Yes □ 2 No
Fig. 3-60 Data Deletion Confirming Screen
(3) Pressing the [START] key starts spectrum
measurement. After measurement, you can execute
the same operation as in (1). By repeating this
operation, it is possible to perform spectrum
measurement for up to 5 samples.
START:Meas.Sample2：_＿
Fig. 3-61 Guidance on Measurement Start
3 - 96
Hide quick links:
Advertisement
Table of Contents
