Hitachi U-5100 Instruction Manual page 122

3.2 Automatic Continuous Measurement (6-cell auto mode)
Photometry
ID
6
7
8
9
10
Select function. : _
1)Meas. 2)Save 3)Print
Fig. 3-34
Table 3-26 Guidance after Sample Measurement
Setting Item
Meas. You can make setting related to measurement.
"New Meas.", "Continue" and "Remeasure" are
selectable.
[1] New Meas. : Selected when newly measuring
[2] Continue
[3] Remeasure : Selected when remeasuring a
3 - 58
ABS
0.301
0.251
0.419
0.110
0.234
Example of Display after Sample
Measurement
(number of samples: 10)
Description
samples with the same calibration
curve.
: Allows you to start measurement
from the number following the
previously measured sample.
When this function is selected, the
guidance given below appears.
Enter the number of samples to be
measured and press the [ENTER]
key.
Input value. ： ＿
No.of Sample [1-140]
Display with 10 samples measured
measured sample. When this
function is selected, the guidance
given below appears. Select a
sample to be remeasured with the
[▲] or [▼] key, set the sample to
cell 1 and press the [START] key to
carry out remeasurement.
To execute auto zero, press the
[AUTOZERO] key.
CELL A