Display Of Several Sensors In Measuring Mode; Navigation - wtw Multi 3420 Operating Manual

Operation
Info
Measured value display
27

4.3.2 Display of several sensors in measuring mode

The measured values of the connected sensors can be displayed in the
following ways:
 Clear display of all connected sensors
 Detailed display of one sensor
(e.g. incl. CMC feature with pH sensors)
With the softkey you can very easily switch between the two display
types. The suitable softkey is displayed, depending on the operating
situation.
15.03.2014 08:00

4.3.3 Navigation

In the measured value display, you can
 use <><> to select one of several connected sensors. The
selected sensor is displayed with a colored background.
The following actions / menus refer to the selected sensor
 open the menu for calibration and measurement settings with
<MENU/ENTER> (short keystroke)
 open the system menu with the sensor-independent settings by
pressing <MENU/ENTER>Storage & config for a <MENU/
ENTER
 change the display in the selected measuring window (e. g. pH ><−
mV) by pressing <M>.
_
>long keystroke, approx. 2 s).
Info 15.03.2014 08:00
ba75864y18
Multi 3420
01/2015