Display Of Navigation Paths In Short Form - wtw photoLab 7100 VIS Operating Manual

®
photoLab 7100 VIS
Use of the function
keys
Navigation with
arrow keys
(<><>) and
<START·ENTER>
ba77095e03 10/2017
The function keys F1 to F4 are below the display. Their functions change
depending on the operating situation and mode. The current functions are
displayed in the function key menu at the bottom edge of the display.
Apart from navigation, the function keys are also used for other operations:
 Opening a selection list or input field
 Executing a command (directly or with intermediate query)
 Switch over between two display options,
such as absorbance
These operating elements are used to select an item from a menu or list. The
current selection is displayed in reverse video. Pressing of
<START·ENTER> confirms the selection.
Apart from navigation, the <START·ENTER> key is also used for other oper-
ations:
 Opening a selection list or input field
 Confirming a selection
 Confirming entries of text and numerals
 Executing a command (directly or with intermediate query)
 Activating an item in a selection list (
4.2.2

Display of navigation paths in short form

In this operating manual, the introductory navigation steps leading to individ-
ual menus or dialogs are clearly shown in a gray box. The box indicates a
section of the menu tree.
Starting point of the description is always the main menu, which can be
reached with the <HOME> key from any operating situation. From there nav-
igation takes place downward.

transmission

= active)
Operation
19