Navigation - wtw pHotoFlex STD Manual

®
pHotoFlex STD
Measured value
display
Menus and dialogs
ba75958e07 11/2020

4.3.2 Navigation

In the measured value display, you can
 select the measured parameter with <M>:
– Concentration
– Absorbance
– % Transmission
 open the menu with <MENU>
 switch to the superordinate Start menu with <ESC>.
The menus for settings and dialogs in procedures contain further subele-
ments. The selection is done with the keys < > < >.
The current selection is displayed inverse.
 Menus
The name of the menu is displayed at the upper edge of the frame. Menus
are opened by confirming with <START/ENTER>. Example:
Configuration
Photometry
Timer
System
Info
 Settings
Settings are indicated by a colon. The current setting is displayed on the
right-hand side. With <START/ENTER>, the selection of the possible set-
tings is opened. Subsequently, the setting can be changed with < > < >
and <START/ENTER>.
Example:
Display
:
Illumination
:
Contrast
:
Brightness
 Functions
Functions are designated by the name of the function. They are immedi-
ately carried out by confirming with <START/ENTER>.
Example:
Auto off
50 %
50 %
Operation
19