Edwards nEXT730D Instruction Manual page 21

To configure the pump, either use a customer simple serial system via the serial link, or
use the Edwards TIC Turbo Controller, TIC Turbo Instrument Controller or TAG Controller.
The TICs have a feature which allows storage of a nEXT pump's configuration. The
configuration can then be downloaded to another nEXT pump. This is useful when
configuring a number of nEXT pumps with the same settings before they are fitted to a
system.
The USB service port can also be used in conjunction with the Edwards nST2 PC software
to configure the nEXT pump. The configuration can then be downloaded to another
nEXT pump, in the same way as it can with a TIC, which is useful when configuring a
number of nEXT pumps.
B8J200880_D
300812671_002_C3
B8J200880_D - Overview
Page 21 08/2021 - ©Edwards Limited