Safety Symbols; Trained Personnel - Edwards nEXT730D Instruction Manual

1.1.1 Safety symbols

The safety symbols on the products show the areas where care and attention is
necessary.
The safety symbols that follow are used on the product or in the product
documentation.

1.2 Trained personnel

"Trained personnel" for the operation of this pump are
▪ skilled workers with knowledge in the fields of mechanics, electrical engineering
and vacuum technology and
▪ personnel specially trained for the operation of vacuum pumps.
B8J200880_D
300812671_002_C3
B8J200880_D - Safety and compliance
Warning/Caution
An appropriate safety instruction must be followed or caution to a po-
tential hazard exists.
Warning - Dangerous voltage
Identifies possible hazards from dangerous voltages.
Warning - Hot surfaces
Identifies a potential hazard from a hot surface.
Warning - Protective earth (ground)
Earth point for electrical equipment.
Warning - Use protective equipment
Use appropriate protective equipment for the task.
Warning - Risk of explosion
There is a risk of explosion when you do the task.
Page 9 08/2021 - ©Edwards Limited