Edwards nEXT730D Instruction Manual page 116

Edwards Ltd
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
UK
The product specified and listed below
Turbomolecular Pumps with Integrated Frequency Converter
•
Type Designation
nEXTa1 f1f2 NWf3 f4
nEXTa1D f1f2 NWf3 f4
nEXTa1iD f1f2 NWf3 f4
nEXTa1iiD f1f2 NWf3 f4
a1 = 730 or 930 or 1230
f1 = ISO-K or ISO-F or CF
f2 = 100 to 250
f3 = 16 or 25 or 40
f4 = INV or empty
Is in conformity with the relevant requirements of European CE legislation:
2006/42/EC Machinery directive
Note: The safety objectives of the Low Voltage Directive 2014/35/EU were complied with in accordance
with Annex 1 No. 1.5.1 of this directive.
2014/30/EU Electromagnetic compatibility (EMC) directive
Class B Emissions, Industrial Immunity
2011/65/EU Restriction of certain hazardous substances (RoHS) directive
as amended by Delegated Directive (EU) 2015/863
Based on the relevant requirements of harmonised standards:
EN 1012-2:1996 +A1:2009
EN 61010-1:2010+A1:2019
EN 61326-1:2013
This declaration, based on the requirements of the listed Directives and EN ISO/IEC 17050-1, covers all product
serial numbers from this date on: 2021-06-14
This declaration becomes invalid if modifications are made to the product without prior agreement.
Ian Keech – VP Engineering, Scientific Vacuum Division
Burgess Hill
This product has been manufactured under a quality management system certified to ISO 9001:2015
EU Declaration of Conformity
Part Numbers
B8xxxxxxx
x = A to Z or 0 to 9
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
Safety requirements for electrical equipment for measurement, control and laboratory
use. General requirements
Electrical equipment for measurement, control and laboratory use. EMC requirements.
General requirements
You must retain the signed legal declaration for future reference
Documentation Officer
Jana Sigmunda 300
Lutín , 78349
Czech Republic
T: +42(0) 580 582 728
documentation@edwardsvacuum.com
Description
a1 = Pumping speed
f1 = Flange type
f2 = High Vacuum flange
f3 = Fore-Vacuum flange
i = Interstage port
ii = 2 Interstage ports
INV= Inverse – Upside Down
Axel Guddas – General Manager
Cologne