Unpacking Instructions - Henny Penny PFE-590 Operator's Manual

Henny Penny
SECTION 2. INSTALLATION 第二部分 安 装
2-1. UNPACKING
INSTRUCTIONS
开箱指导
NOTE
Installation of this unit should be performed only by a qualified
service technician.
安装操作必须由资格服务技术员操作。
1. Cut and remove the metal bands from the carton.
断开并除去包装箱上的金属带。
2. Remove the carton lid and lift the main carton off the fryer.
拿掉纸箱，将纸箱抬离炸锅。
3. Remove corner packing supports (4).
拿掉边角包装支撑物（4只）
4. Cut and remove the metal bands holding the fryer to the pallet.
Do not unlatch the lid before completion of steps 5, 6, and 7.
断开并除去绑扎炸锅与底板的金属带。在未完成5，6，7步
之前，不要开锅盖。
5. Remove the fryer from the pallet.
将炸锅从底板上移开
The fryer weighs approximately 900 lbs. (405 Kg). Extreme care
should be taken when moving the fryer to prevent personal
injury.
炸锅重900磅（405公斤），搬动炸锅时，务必小心，以免造
成人身伤害。
6. Remove rear cover.
5
拿掉后盖。
Model PFE-590