Henny Penny PFE-590 Operator's Manual page 42

Henny Penny
2. "DAILY" shows in the display. Press any of the Product buttons
to view the usage of that product. Press and hold the Function
button to exit Special Program mode.
显示板上显示"DAILY"，可以按下任意一个产品按钮以回顾产
品的用法。按下不要松开功能按钮，可以退出特殊程序模式。
1. Press and hold the Function button for two seconds until "REG
PROGRAM" shows in the display. As soon as "REG
PROGRAM" shows in the display, press and release the Function
button 2 times until "RESET USE" shows in the display.
按下并保持功能按钮2秒钟,这时"REG PROGRAM"会显示出
来。 然后， 按下再释放功能按钮2次， 这时显示屏上显示"RESET
USE"。
2. When "CODE" shows in the display, press 1-3-5. "DAILY" will
show in the display, and press any of the Product buttons to reset
them to 0.
当显示屏上显示"CODE"时，按下1-3-5，显示屏上显示
"DAILY"，然后按下相应的产品按钮重设至零。
Factory Presets (F/C, Gas/Electric, Speaker Volume,
Speaker Frequency, Codes, Initialize System)
出厂预设（F/C, Gas/Electric, Speaker Volume,
Speaker Frequency, Codes, Initialize System）
1. Press and hold the Function button for two seconds until "REG
PROGRAM" shows in the display. As soon as "REG
PROGRAM" shows in the display, press and release the Function
button 3 times until "FAC PRESET" shows in the display.
按下保持功能按钮不放2秒钟，这时"REG PROGRAM"会显示
出来。 然后， 按下再释放功能按钮3次， 这时显示屏上显示"FAC
PRESET"。
42
Reset Usage 重新复位用法
Model PFE-590