Table of Contents
Advertisement
4.2 Unpacking the unit
CAUTION
INFORMATION
Risk of injury from sharp edges
• Wear protective gloves.
When unpacking the unit, inspect it for transport damage.
Do not install damaged units or put into service.
1. Remove the packaging.
2. Pull the protective film off the unit.
3. Remove all packaging material from the cooking chamber.
4. Clean the unit (See Operating instructions).
5. Enter the information from the nameplate into the Start-up operation
report.
6. Enter the information from the nameplate into the Operating
instructions.
Installation instructions
Transporting the unit
19
Advertisement
Table of Contents
