Henny Penny PFE-590 Operator's Manual page 41

Electric pressure fryer

Hide thumbs Also See for PFE-590:

Henny Penny

3-14. SPECIAL PROGRAM MODE

特别的程序模式

NOTE 注意

Another product can be programmed while in the program mode by

following these procedures:

通过下面的步骤，我们可以在程序模式中执行另外一个产品的程序设

置：

Press and hold the SCAN button at any time while in the Program mode

and the display will scroll "SELECT PRODUCT". Then press any of the

product buttons, (1-0), and now that product can be programmed.

在程序模式中，按下SCAN按钮不要松开，显示板会显示"SELECT

PRODUCT" （选择产品），然后按下任意一个产品按钮（1-0），现

在就可以执行设置程序了。

15. To program second interval, press and release the SCAN button while in

the Time Mode of the first mode. "INIT 2" and "TIME" will flash on

the left side of the display. Then follow the steps above, starting with

step 4.

稍等片刻，在第一个模式的时间模式下，按下再释放SCAN按钮，

"INIT 2" 和"TIME" 会在显示板的左边闪亮。然后从步骤4开始执

行下去。

1. Press and hold the Function button for two seconds until "REG

PROGRAM" shows in the display. As soon as "REG

PROGRAM" shows in the display, press and release the Function

button 1 time until "REVIEW USE" shows in the display.

按下不要松开功能按钮2秒钟，"REG PROGRAM"会显示。然

后紧接着按下再释放功能按钮1次，这时"REVIEW USE"会显

示出来。

Review Usage

回顾使用方法

Model PFE-590

Table of Contents