Henny Penny PFE-590 Operator's Manual page 7

Henny Penny
2-1. UNPACKING
INSTRUCTIONS
10. Prepare the deadweight valve for operation.
准备好重锤阀备用
The metal shipping support is placed inside the dead weight valve
housing to protect the orifice and weight during shipment. This support
must be removed prior to installation.
装运用的金属支架在重锤阀罩的里面， 在装运过程中保护通气孔和
重锤，该支架必须在安装炸锅以及炸锅启用前拿掉。
A. Unscrew the top cap.
拧开顶盖。
B. Remove the round weight.
取出圆形重锤。
C. Remove and discard the shipping support.
拿掉装运支架。
D. Clean the orifice with a dry cloth.
用干布清洁通气孔。
E. Replace the weight and secure the top cap.
将重锤放回原处，拧紧顶盖。
13. Remove the protective paper from the fryer cabinet. It is necessary
to clean exterior surface with a damp cloth.
将炸锅箱体外面保护纸除去，并用湿布清洁外表面。
7
Model PFE-590