Unpacking The Unit - Henny Penny FlexFusion FSE-610 Installation Manual

Transporting the unit
4

Unpacking the unit

16
c) Move the unit to the installation site.
4.3 Unpacking the unit
CAUTION
Risk of injury from sharp edges
a) Wear protective gloves.
NOTICE
When unpacking the unit, inspect it for transport damage. Do not install
damaged units or put into service. Enter the information from the
nameplate into the commissioning report.
a) Remove the packaging.
b) Pull the protective film off the unit.
c) Remove the packaging material from the cooking zone completely.
d) Lift the unit off the pallet and place in position.
e) Clean the unit (see chapter "Cleaning and servicing the unit" in the
manual).
f) Separate and dispose of the packaging material.