Henny Penny PFE-590 Operator's Manual page 44

Electric pressure fryer

Hide thumbs Also See for PFE-590:

Henny Penny

Before attempting to change the other modes in the Factory Preset

mode, please call Technical Service Department at Henny Penny.

1-800-417-8405.

在试图要更改其他的工厂预设模式之前，请致电Henny Penny技

术服务部门1-800-417-8405。

Tech I/O Mode 技术I/O模式

1. Press and hold the Function button for two seconds until "REG

PROGRAM" shows in the display. As soon as "REG

PROGRAM" shows in the display, press and release the Function

button 4 times until "TECH I-O" shows in the display.

按下保持功能按钮不放2秒钟，这时"REG PROGRAM"会显示

出来。然后，按下再释放功能按钮4次，这时显示屏上显示"TECH

I-O"。

2. When "CODE" shows in the display, press 2-4-6 (1-7-7-6 for CE

units). "HEAT', "PRESSURE", and "PUMP" will show,

alternately, in the display. Also, the LEDs over 1, 2 and 3 will

flash alternately.

当显示屏上显示"CODE"时，按下2-4-6（1-7-7-6 是为了CE 产

品），"HEAT', "PRESSURE",和"PUMP" 会交替在显示屏上

显示。指示灯1，2和3也会交替显示。

3. To test the heat circuit, press and hold the 1 button.

测试热循环，按下并保持1按钮。

4. To test the pressure system, press and hold the 2 button.

测试压力循环，按下并保持2按钮。

5. To test the pump system, press and hold the 3 button.

测试泵循环，按下并保持3按钮。

CE Only: 仅为CE产品。

NOTE 备注

Model PFE-590

Table of Contents