Henny Penny PFE-590 Operator's Manual page 20

Electric pressure fryer

Hide thumbs Also See for PFE-590:

Henny Penny

3-3. MELT CYCLE OPERATION If the shortening is below 185℉ (85℃), with the Power

融油周期操作

3-4. SWITCHES AND 开关和指示器

INDICATORS

Temperature Display

温度显示

"COOL" Mode

冷却模式

switch in the "POWER" position, the fryer will enter the melt

cycle. The shortening heats slowly to prevent scorching of the

shortening. The heat cycles on and off to slowly melt the

shortening. At 185℉(85℃), the heat stays on until 250℉ (121

℃), the"COOL" mode, is reached. To exit the "COOL" mode,

press the COOL button.

如果电源开关处于"电源"的位置，而油的温度低于185℉ (85

℃)，那么炸锅将进入融油周期。油被缓慢加热，以免因过热

而烧焦。加热融油是慢慢的开和关控制的，185℉(85℃)时，

慢慢的加热，到了250℉ (121℃)时，就进入"冷却"的模式。

停止加热。要退出"冷却"模式，按"COOL"按钮。

Once the power switch is turned, the display reads the

actual cook pot temperature until a cook cycle is started. Press the

temperature button, during a cook cycle, to display temperature.

电源开关打开，显示器会显示炸锅的实际温度直到下一个烹炸

周期开始。在烹炸过程中，按下温度按钮，显示温度。

After cooking, or filtering the shortening, the temperature

automatically goes into the COOL mode, which keeps shortening

at a lower temperature. This temperature extends the shortening life

and minimizes the time to heat the shortening for the next cook

cycle.

在烹炸或过滤炸油后，温度会自动进入冷却模式，使炸油保持

在一个低的温度。这个温度可以延长炸油的寿命并且能缩短升

温至下一个烹炸周期的时间。

Model PFE-590

Table of Contents