Table of Contents
Advertisement
2-1. INTRODUCTION
2-2. UNPACKING
503
SECTION 2. INSTALLATION
This section provides the installation instructions for the Henny Penny
heated express cabinet.
Installation of this unit should be performed only by a qualified
service technician.
Do not puncture the skin of the unit with drills or screws as
component damage or electrical shock could result.
The Henny Penny heated express cabinet has been tested, inspected,
and expertly packed to insure arrival at its destination in the best
possible condition. The unit has been bolted to wooden skid. All
items have been packed and taped inside of the unit. The unit is then
packed inside a triple wall corrugated carton with sufficient padding to
withstand normal shipping treatment.
Any shipping damages should be noted in the presence of the
delivery agent and signed prior to his or her departure.
To remove the Henny Penny cabinet from the carton, you should:
1. Carefully cut banding straps.
2. Open flaps of carton and remove packing.
3. Lift carton from unit.
4. Remove four bolts mounting the merchandiser to the skid.
5. Install optional legs on units if available.
To avoid breaking side glass or damaging unit, lay unit on its
back, not on its side, when installing legs. Install legs before
installing the shelves.
Model HEC-103/104/123/124
2-1
Advertisement
Table of Contents
