Download Print this page

Henny Penny PFE-590 Operator's Manual page 27

Electric pressure fryer
Hide thumbs Also See for PFE-590:

Advertisement

Henny Penny
Before loading product onto the racks, lower the racks
into the hot shortening to prevent the product sticking to
the racks.
把产品放在烹炸架上之前,先降低支架,放入热油中热一
下,以防止产品粘在烹炸架上。
6. Lower and lock the lid, and press the appropriate product button.
降低并锁住盖子,然后按下适当的产品按钮。
7. At the end of the cycle, the pressure vents automatically and an
alarm sounds, while the display shows "DONE". Then press the
appropriate Product button.
在要结束时,压力会自动放出和铃声响起,显示器显示
"DONE"。然后按下适当的产品按钮。
8. Wait for the pressure gauge to show "0" pressure in the pot
before attempting to open the lid.
在打开锅盖之前,要等到压力表显示"0"才可以。
Check the pressure gauge reading. DO NOT attempt to open
the lid until the pressure drops to zero. Opening the lid when
the cook pot is pressurized will allow hot shortening and
moisture to escape from the cook pot, resulting in severe
burns.
检查压力表的读数。如果压力没有降到零,不要打开锅盖。
在加压时如果打开锅盖,热的油和蒸气会从炸锅中喷出,
造成严重的伤害。
9. Unlock and raise the lid cautiously.
开锁然后小心的提起锅盖。
10. Using the rack handles, remove the racks of product from
the carrier, starting with the top rack.
用烹炸架的把手, 从轨道中上面的烹炸架开始移出烹炸架。
27
NOTE 注 意
Model PFE-590

Advertisement

loading