Introduction; Unpacking - Henny Penny EPC-2 Operator's Manual

2-1. INTRODUCTION

2-2. UNPACKING

707
SECTION 2. INSTALLATION
This section provides the installation instructions for the Henny Penny
heated express cabinet.
Installation of this unit should be performed only by a qualified
service technician.
Do not puncture the skin of the unit with drills or screws as
component damage or electrical shock could result.
The Henny Penny heated express cabinet has been tested, inspected,
and expertly packed to insure arrival at its destination in the best
possible condition. The unit has been bolted to wooden skid. All
items have been packed and taped inside of the unit. The unit is then
packed inside a triple wall corrugated carton with sufficient padding to
withstand normal shipping treatment.
Any shipping damages should be noted in the presence of the
delivery agent and signed prior to his or her departure.
To remove the Henny Penny cabinet from the carton, you should:
1. Carefully cut banding straps.
2. Open flaps of carton and remove packing.
3. Remove carton from unit.
4. Remove unit from packaging.
Model EPC-2, EPC-3 & EPC-4
2-1