jcb JS200 Service Manual page 455

Section F
4 - 1
Precautions during Installation
Before installation, check the overall condition of the axial piston motor, are any parts loose, are P1, P2 drain ports and pilot
ports completely sealed so that contaminants cannot enter the axial piston.
Rotation Direction
The relationship between the flow direction of the hydraulic oil and the rotation direction is as shown below.
Arrow Oil input port
P1
P2
9803/6400
Transmission
Motor/Gearbox
Oil output port
P2
P1
Fig 9. Rotational Direction
Rotation direction (viewed from output shaft end of motor)
Rotation to right (clockwise)
Rotation to left (counterclockwise)
Section F
4 - 1
Issue 1