jcb JS200 Service Manual page 323

Section E
51 - 8
Assembly (continued)
7. After inserting the spool, push the top of the spool with
your finger and slide it. The spool should slide smoothly
and if there is any resistance, do not use it.
8. Fit the 'O'-ring to the inner housing (19) and install pipe
(13), spring seat (14), spring (15), plunger (16), stopper
(17) and rod (26) into the housing. (Rod for S8 total
length is 9.0 mm).
9803/6400
Hydraulics
Solenoid Valve (8-spool)
Section E
51 - 8
Issue 1