jcb JS200 Service Manual page 270

Hydraulics
Section E Section E
31 - 2 Control Valve JS200/JS240 31 - 2
The following details refer to the illustrations at the beginning of this Section.
Operation
The control valve is constructed with the 4-spool and 5-spool sides overlapping and integrated into one.
When all spools are neutral
1. Neutral passage (Refer to Fig. 1,2)
The oil delivered by P port passes through the (A) cavity by the 4-spool neutral passage, and is returned to the tank by T
R R
port. Part of the oil passes through the (C) (D) (E) (F) passage and is returned to the tank by T port. If the machine is started
L
from cold, the oil also pushes open the negative control relief valve (B).
Pressure in (A) cavity is led from P port to the pump and controls the P port delivery volume. (Negative control).
sr R
Also, when there is a large volume of oil flowing through the neutral passage due to a lag in the pump's delivery control, the low
pressure relief valve, which is contained in the negative control relief valve, works to prevent the pressure of P port from
SR
becoming abnormally high.
The oil delivered by P port passes through the neutral passage A of the 5-spool control valve via passage Y into the 4-spool
L
passage W passing through (G) cavity, pushing open negative control valve (H) and flowing to the T port. Part of the oil
R
passes through the (C) (D) (E) (F) passage and is returned to the tank from the Tl port.
The pressure of (G) cavity is led from the P port to the pump and controls the P pump delivery volume.
SL L
2. Signal Passage (Refer to Fig. 1,3,9)
The oil from the signal hydraulic source entering the P; port flows through the restriction (a) and is led to the P port and
P
passage (b), 5-spool travel spool signal land part, passing through passage (c) (d) and is released to the 4-spool tank passage.
Part of the oil entering P port flows through restriction (I) and is led to P port and passage (e), flows through each spool of the
P P
5-spool signal land part and is released to the tank passage.
Also, the oil passing through restriction (J) flows through passage (f), land (k) and flows to the tank passage. Part of the oil flow
from passage (g) (h) to land (L) and is released to the 4-spool tank passage.
9803/6400 Issue 1