jcb JS200 Service Manual page 340

Section E
72 - 1
Bucket Ram
Removal
! ! WARNING
Hydraulic Pressure
Hydraulic fluid at system pressure can injure you. Before
disconnecting or connecting hydraulic hoses, stop the
engine and operate the controls to release pressure
trapped in the hoses. Make sure the engine cannot be
started while the hoses are open.
INT-3-1-11/1
! ! WARNING
Lifting Equipment
You can be injured if you use faulty lifting equipment.
Make sure that lifting equipment is in good condition.
Make sure that lifting tackle complies with all local
regulations and is suitable for the job. Make sure that
lifting equipment is strong enough for the job.
INT-1-3-7
Prepare the Machine, and lower the attachment to the
1.
ground.
2. Place a wooden block under the bucket ram.
3. Stop the engine, remove the key.
Release the Tank pressure, see Releasing the Tank
Pressure.
9803/6400
Hydraulics
Hydraulic Rams
Section E
72 - 1
Cap nut of breather
Issue 1