jcb JS200 Service Manual page 173

Section C
8 - 6
Self Test Function (continued)
Setting Function
*
This section deals with setting separate parameters:
*
1. Breaker engine speed.
2. Automatic idle time.
*
In addition to the previous sections displays, the following
switches are used.
*
S H
L F
* Setting Breaker Engine Speed
*
With the starter key in the ON position the display is as
shown. Start the engine.
*
Press the CHANGE switch to produce the display shown
right.
*
Press the PATTERN switch to produce the display shown
right. Engine RPM is displayed in the CLOCK window.
9803/6400
Electrics
Self Test
Message
WORK MODE
CLOCK
Message
S : STANDARD MODE
WORK MODE
CLOCK
DESTINATION, MODEL NAME
Message
CH: MN
WORK MODE
CLOCK
SETTING BREAKER ENGINE RPM
Message
EA: B ( RPM )
WORK MODE
CLOCK
Section C
Self-check
MODE
Self-check
Change
MODE
Self-check
Change
MODE
Self-check
Pattern
MODE
8 - 6
Issue 2*