jcb JS200 Service Manual page 418

Section E
92 - 9
Motor Assembly/Cylinder Assembly
*
Assembly (cont'd)
6 Mount collar 53 and inner ring of taper roller bearing 1
on motor output shaft 24.
Using a jig, (see Special Tools, Section 1) mount inner
8
ring 1 on output shaft 24.
9803/6400
Hydraulics
Slew Motor
7 Apply a thin coat of JCB Retainer where the inner ring is
mounted on motor output shaft 24.
Apply grease to the lip of seal 2 and use a press and jig
9
(see Special Tools, Section 1) to force fit the seal into
position.
Section E
92 - 9
Issue 2*