Adjusting on-screen display menus
Adjust various on-screen display (OSD) settings including the position, OSD transparency and
timing for OSD to disappear.
Determining the on-screen display position
Adjust the location of the on-screen display (OSD) menus.
1. Select MENU > Configuration > Menu Preferences > Menu Horz Offset or Menu Vert
Offset.
2. To determine the location on the screen where you want OSD to appear, adjust the slider by
arrow keys or select ENTER to input the value.
3. After inputting the value, select ENTER to apply.
Showing messages
Enable or disable the on screen message dialogs. For example, input source, IP Address, Slot
information, Gamma information, and so on.
1. Select Menu > Configuration > Menu Preferences > Show Messages.
2. To swap, select ENTER.
Setting the transparency of the on-screen display position
Change the on-screen display (OSD) menus background to be transparent. As the value increases,
more of the image behind the menu is visible.
1. Select MENU > Configuration > Menu Preferences > Menu Transparency.
2. Adjust the slider by arrow keys or select ENTER to input the value.
3. After inputting the value, select ENTER to apply.
Changing the splash screen
Select splash screen which is the screen with no source is displayed.
1. Select Menu > Configuration > Menu Preferences > Splash Screen Setup.
2. Select the appropriate splash screen:
•
Factory Logo
•
Blue
•
Black
•
White
3. Select ENTER.
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Configuring system settings
53