Showing Messages; Setting The Transparency Of The On-Screen Display Position; Changing The Splash Screen; Setting Time Out For On-Screen Display - Christie HS 2K Series User Manual

Showing messages

Enable or disable the on screen message dialogs. For example, input source, IP Address, Slot
information, Gamma information, and so on.
1. Select Menu > Configuration > Menu Preferences > Show Messages.
2. To swap, select ENTER.

Setting the transparency of the on-screen display position

Change the on-screen display (OSD) menus background to be transparent. As the value increases,
more of the image behind the menu is visible.
1. Select MENU > Configuration > Menu Preferences > Menu Transparency.
2. Adjust the slider by arrow keys or select ENTER to input the value.
3. After inputting the value, select ENTER to apply.
If the projector has not detected an input source, the Menu Transparency function is off.

Changing the splash screen

Select splash screen which is the screen with no source is displayed.
1. Select Menu > Configuration > Menu Preferences > Splash Screen Setup.
2. Select the appropriate splash screen:
• Factory Logo
• Blue
• Black
• White
3. Select ENTER.

Setting time out for on-screen display

Adjust the time for on-screen display to disappear.
1. Select Menu > Configuration > Menu Preferences > Menu Time Out.
2. Select the appropriate time:
• Off
• 1 Min
• 3 Min
3. Select ENTER.
HS Series 2K User Manual
020-002040-01 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Configuring system settings
53