Ebl-Edge Blending - Christie GS Series Technical Reference

Examples
Change the vertical size of the display area to 100%:
(DZV 100)
EBL–Edge Blending
Creates a single image from a multi-projector installation.
Commands
Command Description
EBL+SLCT <0 | 1> Enables or disables edge blending.
EBL+MRKR <0 | 1.> Enables or disables markers.
EBL+GRID Enables or disables the grid test pattern.
EBL+COLR Displays the solid color test pattern.
EBL+TOPW Sets the top blend width.
EBL+BTMW Sets the bottom blend width.
EBL+LFTW Sets the left blend width.
EBL+RHTW Sets the right blend width.
EBL+BLOF Sets the bight area brightness offset.
EBL+NBOF Sets the non-blend area brightness offset.
EBL+BGAM Sets the blend area gamma drop off curve.
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Serial API commands
Values
0 = Turns off edge blending (Default)
1 = Turns on edge blending
0 = Turns off markers (Default)
1 = Turns on markers
0 = Turns off the grid test pattern (Default)
1 = White
2 = Red
3 = Green
4 = Blue
0 = Turns off the solid test color pattern
(Default)
1 = White
2 = Red
3 = Green
4 = Blue
0 to 1/2 output height (pixel)
0 (Default)
0 to 1/2 output height
0 (Default)
0 to 1/2 output width
0 (Default)
0 to 1/2 output width
0 (Default)
0 to 2000
1000 (Default)
0 to 2000
1000 (Default)
1.8
25