Ebb-Black Level Blending; Ebl-Edge Blending Selection - Christie Boxer 30 Technical Reference

Command Description
command is only available if video
electronics are on. (Saved value)
Examples
Apply a moderate amount of filtering to the image:
(DTL 50)
EBB–Black Level Blending
Selects the black level blend to use on the projector.
Commands
Command Description
EBB+SLCT?L Retrieves a list of available black level
blends. (Read-only)
EBB+SLCT <value> Selects the black level blend to use on the
projector. This command is only available if
video electronics are on. (Saved value)
Examples
Turn off black level blending:
(EBB+SLCT 0)
Retrieve a list of black level blends:
(EBB+SLCT?L)
Select the second black level blend from the list of available blends:
(EBB+SLCT 2)
EBL–Edge Blending Selection
Selects the edge blend to use on the projector.
Basic edge blending can be configured using the projector's display panel, on-screen display or web
interface. To add complex or advanced edge blend configurations, use the Twist (AutoCal) application.
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
51 to 100 = Sharpens the image
Values
—
0 = Turns off black level blending (Default)
1 to 4 = Selects one of the four black level
blends, if available
11 = Selects basic black level blending
(onboard black level blending)
26