FINAL DRIVE
DISASSEMBLY / INSPECTION, FRONT
GEARCASE (ADC)
1. Drain and properly dispose of used oil. Remove any
metal particles from the drain plug magnet
w
2. Remove bolts
retaining the outer cover plate
assembly.
3. Remove the outer cover plate assembly.
Press on the output hub assembly
the outer cover plate(4) to prevent removing more than
the cover plate.
7.40
q
.
NOTE
e
while lifting up on
4. Remove the output hub assembly
5. Inspect the bearing and contact surfaces of the output
hub for signs of wear or damage. Replace component
if found to be worn or damaged.
6. Remove and inspect the armature plates
"AWD Diagnosis" for detailed inspection process.
e
.
t
. Refer to