Disassembly / Inspection, Front Gearcase (Adc) - Polaris RANGER 500 2018 Service Manual

DISASSEMBLY / INSPECTION, FRONT GEAR-
CASE (ADC)
1. Drain and properly dispose of used oil. Remove any
metal particles from the drain plug magnet
w
2. Remove bolts retaining the outer cover plate
assembly.
3. Remove the outer cover plate assembly.
NOTE
Press on the output hub assembly
the outer cover plate(4) to prevent removing more than
the cover plate.
9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual
© Copyright Polaris Industries Inc.
q
.
4. Remove the output hub assembly
5. Inspect the bearing and contact surfaces of the output
hub for signs of wear or damage. Replace component
if found to be worn or damaged.
e
while lifting up on
6. Remove and inspect the armature plates
"AWD Diagnosis" for detailed inspection process.
FINAL DRIVE
e
.
7
t
. Refer to
7.25