CESSNA
MODEL 208B 867 SHP
GARMIN G1000
FUEL
(Continued)
FUEL ADDITIVES
One of the following fuel system anti-ice additives must be added to the
fuel as noted at the following concentrations. Use of fuel anti-ice
additives is required if freezing temperatures are expected during any
part of the flight. Use of an approved Static Dissipator or Biocide is
recommended but not required.
1. MIL-DTL-27686 (EGME) or MIL-DTL-85470 (DiEGME), Type:
Anti-Ice Additive, in a concentration of 0.10 to 0.15 percent by
volume.
2. MIL-DTL-27686 (EGME) or MIL-DTL-85470 (DiEGME), Type:
Anti-Ice Additive, in a concentration of 0.10 to 0.20 percent by
volume.
3. GOST 8313 (Fluid I), Type: Anti-Ice Additive, in a concentration
of 0.10 to 0.30 percent by volume.
4. CIS TU6-10-1458 (Fluid I-M), Type: Anti-Ice Additive, in a
concentration of 0.10 to 0.30 percent by volume.
5. T1301 (SH0396-92), Type: Anti-Ice Additive, in a concentration
of 0.10 to 0.15 percent by volume.
6. DuPont Stadis 450, Type: Static Dissipator, in a concentration as
required to bring fuel up to 300 conductive units, not to exceed 1
Parts Per Million (PPM).
7. SOHIO Biobor JF, Type: Biocide, at a concentration not to
exceed 20 PPM of elemental boron (270 PPM of total additive).
8. Kathon FP, Type: Biocide, at a concentration not to exceed 100
PPM of total additive.
208BPHCUS-01
AIRPLANE HANDLING, SERVICE
(Continued Next Page)
SECTION 8
AND MAINTENANCE
8-21
U.S.