CESSNA
MODEL 208B 867 SHP
GARMIN G1000
ABNORMAL PROCEDURES
DISPLAY UNIT FAILURE
This is indicated by a complete loss of image on a display. If only
individual elements of the display are failed, refer to appropriate
procedures for the individual failures.
IF PFD FAILS
1. DISPLAY BACKUP Button (affected side) . . . . . . . . . . . PRESS
The PFD CDI SYNC and BARO SYNC settings must be ON
to allow the copilot's PFD controls to affect settings on the
MFD. These settings are accessible using the PFD MENU
button.
2. Flight Director . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TRANSFER
3. FD Modes/AUTOPILOT . . . . . . . RESELECT and REENGAGE
4. Transponder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SWITCH
5. COM and NAV Radios . . . . . . . . . . . . . . . . . . . . . . . . . SWITCH
6. PFD Controls . . . . . . . . . . . . . . . . . . . . USE OPERATING PFD
(for required data entry (COM, NAV, Baro setting, etc.))
IF MFD FAILS
1. Either DISPLAY BACKUP Button . . . . . . . . . . . . . . . . . . PRESS
(EICAS information will be displayed on the respective PFD)
FAA APPROVED
208BPHCUS-S12-00
(Flight and EICAS information is displayed on MFD)
NOTE
(Press XFR button to operating PFD)
(to operating COM and NAV radios)
SECTION 9 - SUPPLEMENTS
SUPPLEMENT 12
(to operating transponder)
U.S.
(as required)
S12-7