CESSNA
MODEL 208B 867 SHP
GARMIN G1000
PILOT CONDUCTED PREVENTIVE MAINTENANCE
A certified pilot who owns or operates an airplane not used as an air
carrier is authorized by 14 CFR 43 to perform limited maintenance on
his airplane. Refer to 14 CFR 43 for a list of the specific maintenance
operations which are allowed.
Pilots operating airplanes of other than U.S. registry should
refer to the regulations of the country of certification for
information on preventive maintenance that may be
performed by pilots.
A Maintenance Manual must be obtained prior to performing any
preventive maintenance to ensure that proper procedures are followed.
A Cessna Authorized Service Facility should be contacted for further
information or for required maintenance which must be accomplished
by appropriately licensed personnel.
ALTERATIONS OR REPAIRS
It is essential that the FAA be contacted prior to any alterations on the
airplane to ensure that airworthiness of the airplane is not violated.
Alterations or repairs to the airplane must be accomplished by licensed
personnel, utilizing only FAA Approved components and FAA Approved
data, such as Cessna Service Bulletins.
208BPHCUS-00
AIRPLANE HANDLING, SERVICE
NOTE
SECTION 8
AND MAINTENANCE
U.S.
8-9