Hitachi DKC910I Installation Section page 89

Hitachi Proprietary
Rev.2
INST(IN)07-04-20
3. Installing Stoppers
Table 7-6 Stopper (for HSNBX) Components List (Per One Unit)
Item No.
1 Stopper (R)
2 Stopper (L)
3 Binding Screw (NI)
(1) Remove the two binding screws and loop cable tie fixing the rear sides of the rails.
Figure 7-14 Removing Binding Screws Fixing Rails
Loop cable tie
(2) Fix the stopper (L) and the loop cable tie with the two binding screws temporarily.
Tighten the binding screw in the lower hole on the stopper (L) to fix the loop cable tie.
(3) Fix the stopper (R) and the loop cable tie with the two binding screws temporarily.
Tighten the binding screw in the lower hole on the stopper (R) to fix the loop cable tie.
Figure 7-15 Installing Stoppers
Loop cable tie
Stopper (L)
Binding screw
Parts name Parts No.
3293037-2
3293037-1
SB516N
Rear view of rack
Binding screws
Rear view of rack
Stopper (L)
Copyright © 2019, 2021, Hitachi, Ltd.
Quantity Comment
1 Stopper (For HSNBX)
1 Stopper (For HSNBX)
4 For fixing the Stopper
Loop cable tie
Stopper (R)
Loop cable tie
Stopper (R)
Binding screw
DKC910I
[INST(IN)07-04-20]