Connecting Iscsi Cables - Hitachi DKC910I Installation Section

Hitachi Proprietary
Rev.0.5
INST(IN)09-01-90

9.1.2 Connecting iSCSI Cables

1. Connect the iSCSI cables after making sure of the ports to be connected on the rear face of the Storage
System.
NOTE : When bending the iSCSI cable to connect it, give it a bend with a long radius (not less
Figure 9-7 Connection Port for iSCSI Cables (1/2)
CHB Port Number
*1 : The figure shows DKC with 10 G bps iSCSI installed.
than 40 mm) so as not to apply the cable and the connector excessive stresses.
1B/3B 1D/3D
1F/3F 1H/3H
1A/3A 1C/3C
1E/3E 1G/3G
Rear view of DKC-0
2B/4B 2D/4D
2F/4F 2H/4H
2A/4A 2C/4C
2E/4E 2G/4G
Rear view of DKC-1
1K/3K 1M/3M
1P/3P 1R/3R
1J/3J 1L/3L
1N/3N 1Q/3Q
Rear view of DKC-2
DKC910I
Copyright © 2019, 2021, Hitachi, Ltd.
[INST(IN)09-01-90]