Fixing Hsnbx - Hitachi DKC910I Installation Section

Hitachi Proprietary
Rev.2
INST(IN)07-04-10

7.4 Fixing HSNBX

Table 7-5 Front Bezel Components List (Per One Unit)
Item No.
1 Front Bezel
2 Binding Screw (M5 × 10)
1. Fixing the front side of HSNBX
Fix each of the right and left places on the front side of HSNBX with two binding screws.
Figure 7-12 Fixing the Front Side of HSNBX
2. Fixing the rear side of HSNBX
• For the rail type without a stopper, go to
• For the rail type with a stopper, push the stoppers to secure the right and left sides of HSNBX (see
Figure 7-13).
Figure 7-13 Fixing Stoppers (for Rail Type without a Stopper)
Loop cable tie
Stopper
Parts name Parts No.
5560931-A
SB510N
Front view
Binding screws
Quantity
1
2
Step 3 to install the stoppers.
Rear view
Copyright © 2019, 2021, Hitachi, Ltd.
Comment
Front Bezel
For fixing the HSNBX
Loop cable tie
Stopper
[INST(IN)07-04-10]
DKC910I