Hitachi DKC910I Installation Section page 19

Hitachi Proprietary
Rev.1
INST(IN)02-03-30
Moving the equipment in a lateral direction
When locating the equipment next to the equipment that was already installed, two persons must
cooperate. One pulls the front face of the rack frame and the other holds the side face of the rack frame to
move it.
Push the side face of the rack frame slowly with thumbs and bases of them on both edges of the side
cover of the middle rack. Do not push the side face when the equipment is in a sloping place. Some of the
equipment that has an upper center of gravity may fall down. Pushing the central part of the side cover
excluding the part within 40mm from the edge, or boundary part of the side cover strongly may make the
side cover caved in.
Figure 2-7 Lateral Movement Operation
40mm from the side
cover edge
40mm
Front View of
Rack Frame
Copyright © 2019, 2021, Hitachi, Ltd.
40mm
40mm from the side
cover edge
Do not push the boundary of
side covers.
[INST(IN)02-03-30]
DKC910I