Procedures For Installing Storage System - Hitachi DKC910I Installation Section

Hitachi Proprietary
Rev.1
INST(IN)01-01-10

1. Procedures for Installing Storage System

1. Procedures for installation on the rack frame
In case of a new introduction or moving the Storage System, perform the installation after making sure of
the following necessary works.
Work-1 Unpacking and installing rack frame
Work-2
Work-3 Unpacking a Storage System
Work-4 Removing components
Work-5 Mounting on rack frame
Work-6 Fastening the Storage System
Work-7 Installing Components
Work-8 Connecting the Cables
Work-9 Attaching Decoration Panels
Work-10 Powering ON the storage system
Work-11 TOD (Time Of Day) setting
Work-12 Executing LAN Check
Work-13 Storage System powering off
Carrying in
Installing Rails
See "2. Unpacking and Installing the Rack
"3. Installing
See Rails".
"4. Unpacking Storage
See
"5. Removing
See Components".
"6. Mounting on a Rack
See
See "7. Fastening Storage System".
See "8. Installing Components".
See "9. Connecting Cables".
"10. Attaching Decoration
See
See "Storage System Power On" (INST(GE)05-01-10).
See "TOD (Time Of Day) setting"
See "LAN Check Procedure" (DIAG03-10).
See "Storage System Power Off (Planned Shutdown)"
(INST(GE)05-02-10).
DKC910I
Copyright © 2019, 2021, Hitachi, Ltd.
Frame".
Systems".
Frame".
Panels".
(SVP02-01-10)
[INST(IN)01-01-10]