Hitachi DKC910I Installation Section page 161

Hitachi Proprietary
Rev.2
INST(IN)09-04-100
(3) Connect the 16 cables to the OUT ports on DBs according to Figure 5-4
(LOC05-50)
Example of the cable  : Connect the cable to which the red label is attached to the ENCxxx-1 OUT0
port (red label
(4) Connect the 16 cables mentioned in
5-3 (LOC05-20)
Example of the cable  : Connect the cable to which the red and white label is attached to the
ENCyyy-1 IN0 port (red and white label
If there are other SBX/UBX/FBX, repeat
Figure 9-38 SAS Cable Connection
The connection for SBX is illustrated in the figure below. The connection for FBX is also the same.
For Copper Cable
Red and white label
Red label ENC (SBX)
Copper Cable
For Optical Cable
Red and white label
Optical Cable
for UBX.
).
Step (3)
or Figure 5-5 (LOC05-40)
Step (3)
ENC (UBX)
ENC (UBX)
ENC (SBX)
Red label
to the IN ports on the next DBs according to Figure
for UBX.
).
and Step (4) to connect the SAS cables to all.
ENCyyy-1 (*1)
Red and white label
ENCxxx-1
Red label
*1: yyy = xxx + 8
ENCyyy-1 (*1)
Red and white label
ENCxxx-1
Red label
*1: yyy = xxx + 8
DKC910I
Copyright © 2019, 2021, Hitachi, Ltd.
(LOC05-30) or Figure 5-6
[INST(IN)09-04-100]