Hitachi DKC910I Installation Section page 193

Hitachi Proprietary
Rev.0
INST(IN)14-02-80
(4) In response to the message [INS1105i], click [OK].
Change the IP Address is abnormally terminated if the message "Failed to change the IP address."
is displayed.
Identify the error cause according to the procedure shown in "TROUBLE SHOOTING SECTION"
(TRBL02-04-170).
NOTICE: If the remote connection to the Maintenance PC is disconnected during the operation,
reconnect by changed IP address it to continue the operation. Please perform a
remote desktop reconnection after more than five minutes from pushing down the [OK]
button of a [INS1105i] message. (Operation for connection to SVP, refer to
(SVP01-30).)
(5) When a "Use Duplex SVP" or "SVP Kind" of External IP Address is changed, it is necessary to
execute the following operation.
• Setting an external IP Address (Refer to (INST(AD)10-05-160))
• Executing SSVP Reset
[3] Setting Web Console
Make a setting of the Web Console according to [Web Console] section 1.
(Refer to (INST(AD)10-07-20))
DKC910I
Copyright © 2019, 2021, Hitachi, Ltd.
(WEBCON01-10)
[INST(IN)14-02-80]