Download Print this page
Hitachi DK32EJ-NC Quick Installation Manual
Hitachi DK32EJ-NC Quick Installation Manual

Hitachi DK32EJ-NC Quick Installation Manual

3.5 inch hard disk drives

Advertisement

Quick Links

Specifications
Formatted Capacity*(Gbytes)
Bytes per Sector*
#Cylinders/#Heads/#Disks
Maximum LBA*(Hex)
Seektime:Average(Read/Write)(ms)
Spindle Speed rpm
Interface Type
Transfer rate (MB/s)
Operating Temperature (C/F)
Power: 12Vpeak (Typ) / 5V peak (Typ) (A)
Start Time(s)
Handling Precautions
1. Do not press on the drive. Hold the drive by the sides only, do not apply any
force to the drive during handling or installation
2. Always handle the drive with care to prevent damage from shock, vibration or
electrostatic discharge (ESD). Do not touch the Printed Circuit Board (PCB).
3. Electrostatic Discharge. Static electricity can damage the drive. Before
handling the drive, touch an unpainted metal surface for a few seconds to
drain any static electricity from your body.
4. Keep the original packaging and static-protective bag in case the drive has to
be returned.
Mounting Orientation
1
1. Installation horizontal or vertical ( 6 directions)
2. Provide adequate air flow to cool drive
3. Use 4 mounting screws (6x32 UNC). Maximum screw penetration 3.8mm
(0.15 in) into drive
Connector Layout
Wide LVD 68pin-16bits
© The statements in this publication are not intended to create any warranty, expressed
or implied. Specifications and product offerings subject to change without notice.
All product names and logos are trademarks of their respective owners.
DK32EJ-14
147.8 GB
512
10/5
113711FF
4.9/5.7
10025
Ultra 320
320.0 max
5-55°C
2.15/1.7
25
3.5 inch Hard Disk Drives
Quick Installation Guide
DK32EJ-NC/NW
DK32EJ-72
73.9
512
126648/10/5
89B88FF
4.9/5.7
10025
Ultra 320
SCSI
160 max
5-55°C
2.15/1.7
25
Cable Specifications
1. Use interface cables that meet the ANSI SCSI guideline.
2. Cable length:
Interface cable (MW, Single-ended mode)
SCSI Interface
CableType
Fast-5
Flat Ribbon or Twisted Pair
Fast-10
Flat Ribbon or Twisted Pair
Ultra(Fast20)
Flat Ribbon or Twisted Pair
Interface cable (MW, LVD mode)
SCSI Interface
Cable Type
Ultra2 (Fast)-40
Flat Ribbon or Twisted Pair
Ultra160 (Fast-80)
Flat Ribbon or Twisted Pair
Ultra 320 (fast-160)
Flat Ribbon or Twisted Pair
For sales information on Hitachi products: 1-800-HITACHI (1-800-448-2244)
Web Site: http://www.hitachi.com/storage
DK32EJ-36
36.9
512
26648/5/3
44DC47F
4.9/5.7
10025
Ultra 160
160 max
5-55°C
2.15/1.7
25
Maximum cable length
6m (16 units max.)
3m (16 units max.)
3m (4 units max.)
1.5m (8 units max.)
Maximum cable length
12m (16 units max.)

Advertisement

loading

Summary of Contents for Hitachi DK32EJ-NC

  • Page 1 Connector Layout Wide LVD 68pin-16bits © The statements in this publication are not intended to create any warranty, expressed For sales information on Hitachi products: 1-800-HITACHI (1-800-448-2244) or implied. Specifications and product offerings subject to change without notice. Web Site: http://www.hitachi.com/storage...
  • Page 2 Spare jumpers C3: 2-4, 6-8, 12-14-16,18-20 for NW model, C3: 18-20 for NC model.. These spare jumpers can be used for another set © The statements in this publication are not intended to create any warranty, expressed For sales information on Hitachi products: 1-800-HITACHI (1-800-448-2244) or implied. Specifications and product offerings subject to change without notice.

This manual is also suitable for:

Dk32ej-nw