Attaching Logo - Hitachi DKC910I Installation Section

Hitachi Proprietary
Rev.2
INST(IN)12-01-10

12. Attaching Logo

NOTE: This procedure should be applied at the time of shipment in the factory.
1. Attach the logo to the Front bezel of the DKC-1.
2. After attaching the logo, peel off the clear protection film of the logo.
Figure 12-1 Attaching Logo Label
Table 12-1 Logo Labels
No.
1
Front Bezel (4U) for DKC-1
Logo label
Model Name
VSP 5000 Series
Parts No.
3292735-5
DKC910I
Copyright © 2019, 2021, Hitachi, Ltd.
Locating lines
[INST(IN)12-01-10]