Table of Contents
Advertisement
Hitachi Proprietary
Rev.0
INST(IN)14-02-150
(14) Click [OK] in response to the confirmation message "[2565] Installation data of program product
in the Configuration table will be initialized by this operation. After finishing this procedure, please
set the program product installation again.".
NOTE: When information of DP-VOL implementation or progressing status of quick format
(15) <DKC Configuration window>
NOTE: Check the nameplate of the Storage System, and then enter the serial number.
When the DKC Configuration window is displayed, enter the serial number.
Click [>>Next] .
This procedure is completed when [Cancel] is clicked.
(16) Set the current date and time on which New Installation is performed in the Set Machine Install
Date window, and then click [OK] .
is not included, go to
Step
(15).
DKC910I
Copyright © 2019, 2021, Hitachi, Ltd.
[INST(IN)14-02-150]
Hide quick links:
Advertisement
Table of Contents
