Advertisement
Quick Links
Maintaining the storage system
Ongoing proper maintenance of the storage system maintains the reliability of the storage system and its constant
availability to all hosts connected to it.
For more complex maintenance activities, contact customer support.
Storing the storage system
If the storage system does not receive power for more than six months, the battery can become discharged and possibly
damaged. To avoid this situation, charge the battery for more than three hours at least once every six months.
Note Do not store the equipment in an environment with temperatures of 104ºF (40ºC) or higher because battery life will
be shortened.
Using flash module drives
Observe the following guidelines when handling the listed flash module drives (FMDs). The following types of FMDs are
equipped with a battery or capacitor.
CautionPower up the flash module drives using power from the storage system for at least 90 minutes every month.
Failure to do so can render a flash module drive unusable and voids replacement under the terms of the warranty.
Model
DKC-F710I-1R6FM
DKC-F710I-3R2FM
DKC-F810I-1R6FN
DKC-F810I-3R2FN
https://knowledge.hitachivantara.com/Documents/Storage/VSP_Gx00_and_VSP_Fx00/83-04-2x/VSP_G200%2C_G400%2C...
Drive type
NFH1A-P1R6SS
NFH1C-P1R6SS
NFH1D-P1R6SS
NFH1B-P3R2SS
NFH1C-P3R2SS
NFH1D-P3R2SS
NFHAE-Q1R6SS
NFH1D-P1R6SS
NFHAE-Q3R2SS
Battery
Yes
Yes
N/A
Yes
Yes
N/A
N/A
N/A
N/A
Capacitor
N/A
N/A
Yes
N/A
N/A
Yes
Yes
Yes
Yes
Updated: Mon, 17 Jan 2022 16:51:03 GMT
Powered by
1
Advertisement
Related Manuals for Hitachi DKC-F710I-1R6FM
Summary of Contents for Hitachi DKC-F710I-1R6FM
- Page 1 CautionPower up the flash module drives using power from the storage system for at least 90 minutes every month. Failure to do so can render a flash module drive unusable and voids replacement under the terms of the warranty. Model Drive type Battery Capacitor NFH1A-P1R6SS DKC-F710I-1R6FM NFH1C-P1R6SS NFH1D-P1R6SS NFH1B-P3R2SS DKC-F710I-3R2FM NFH1C-P3R2SS NFH1D-P3R2SS...
- Page 2 Model Drive type Battery Capacitor NFH1D-P3R2SS NFHAE-Q6R4SS DKC-F810I-6R4FN NFH1D-P6R4SS Guidelines for handling the FMDs Follow the guidelines to avoid damaging the components when handling FMDs. • Check the main edge connector of the drive for any damage, deformation, dust, or debris before installing. •...
- Page 3 To remove an optical cable, push the top of the connector of the optical cable (1) to release the latch and remove the SAS cable (2). To remove a LAN cable, push the top of the LAN cable connector (1) to release the latch and remove the LAN cable (2). To remove a PCIe cable, pull the tab of the PCIe cable (1) to release the latch and remove the PCIe cable (2).