Removing Power Supply; Removing Power Supply (Dkcps) For Dkc - Hitachi DKC910I Installation Section

Hitachi Proprietary
Rev.0.5
INST(IN)05-04-10

5.4 Removing Power Supply

The shapes and installation methods of the Power Supply differ depending on each type. Do not make a
mistake to mount the Power Supply in the specified position.

5.4.1 Removing Power Supply (DKCPS) for DKC

1. Loosen the screw (blue) fixing the Power Supply (DKCPS).
2. Open the lever completely, and pull out to remove it.
When the lever is completely opened, the Power Supply (DKCPS) comes out forward.
3. Pull out and remove the Power Supply (DKCPS) while holding the body with both hands.
Figure 5-9 Removing Power Supply (DKCPS) (DKC)
Screw (blue)
DKCPS1
Lever
Copyright © 2019, 2021, Hitachi, Ltd.
DKCPS2
[INST(IN)05-04-10]
DKC910I