Removing Power Supply (Dbps) For Sbx/Ubx/Fbx/Nbx - Hitachi DKC910I Installation Section

Hitachi Proprietary
Rev.1
INST(IN)05-04-20

5.4.2 Removing Power Supply (DBPS) for SBX/UBX/FBX/NBX

1. Pull the lever open () while pressing the latch on the Power Supply (DBPS) inward with right thumb ().
When the lever is completely opened, the Power Supply (DBPS) comes out forward.
2. Pull out and remove it while holding the body of the Power Supply (DBPS) with both hands.
Figure 5-10 Removing Power Supply (DBPS)
Latch
Lever
Latch
DBPS1
Lever
Latch and lever operation of DBPS
Copyright © 2019, 2021, Hitachi, Ltd.
DBPS2
DKC910I
[INST(IN)05-04-20]